Snap – In Magnetic Gasket 19 7/16″ x 28 3/8″ (516)
This gasket may be used to replace models and OEM parts as described below; however, we cannot guarantee compatibility with your unit based on model number alone. If you are not sure of the gasket you need, please contact us and we can walk you through making sure you get the right gasket. The best way to confirm you are ordering the right gasket is to confirm the size of the gasket you need and also the profile of the gasket you need. (Our measurements are always outside edge to outside egde on the website).
This item is an OEM Replacement Refrigeration Door Gasket for a Commercial Atlas Refrigeration Unit.
• Please double check your measurements from outside corner to outside corner. If the measurement you have are more than a half inch in difference please contact us at 1-866-899-5377 and one our agents will gladly assist you.
• Replacing your worn and torn commercial refrigeration door seals will “Help You Keep Your Cool” and also cut down on your electrical usage for the unit. Properly maintaining the door seal by wiping them down with hot soap and water will ensure a longer life for them as well. Do not use any bleaching compounds as this will harden the seal quicker and cause it to split faster.
• Your Atlas commercial refrigeration unit is designed to turn on and off when it reaches the desired temperature. When the commercial refrigeration door seal fails, the compressors will turn on more often costing you big dollars even when you are not even in operation for the day.
• Restaurant gaskets are often the first thing health inspectors are going to check on with their inspections. They also recognize when they are maintained well. So keeping your restaurant seals clean and replace them when they are loosing air, you can save money and headaches in the sort and long term.
Here at WWW.DIYGaskets.com “We’ll Help You Keep Your Cool”